Wired network

When using a wired network you can choose to enter details, such as the IP address to be used, manually. This is not mandatory and you can choose to use the details that have been automatically generated.

Enter details for a wired network connection

1. Select Manual from the Configure IPv4 drop-down list
2. Enter the IP Address
3. Enter the Subnet Mask
4. Enter Router
5. Enter DNS Server
6. Click Apply

 Check that the computer can connect to the internet via a wired network

1. Click Internet access
   A success message should appear
2. Click Close

If no success message appears you need to check your connection.